Skip to Main Content

Corn Stand Management

Categories: PLANTING, CORN
While every spring season is unique, some growing principles are timeless and should be kept in mind year after year. Below are several good fundamentals to remember as you consider your corn management plan.

Environmental Requirements for Corn Emergence
A uniform corn stand is essential to producing maximum corn yields. Here are a few environmental requirements for seed development:
  • Soil temperature: Before planting, a field’s soil temperature should be greater than 50°F.
  • Seed-to-soil contact: Contact with moist soil is essential because a seed must absorb water equal to or greater than 50% of its mass in order to germinate. Poor soil contact can cause emergence delays and lead to inconsistent ear size on late-emerging plants.
  • A low salt diet: Excess salt near the seed can cause seedling burn and weakening, which leads to more susceptibility to pathogens. Limit pop-up fertilizer (fertilizer applied directly to the seed in-furrow) to a maximum of 5 gallons per acre. If you need to apply more than 5 gallons per acre of starter fertilizer, place the material at least 2” to the side and 2” below the seed.
  • Well-oxygenated soil: Cell division in corn seedlings is a respiratory process and requires an adequate supply of oxygen for proper development. Potential field conditions that can limit oxygen to the seedling include the physical destruction of pore space by compaction and cold spring rains that saturate and displace oxygen from the soil.

Uneven corn emergence – the middle corn plant is a late emerging plant. – Source: Syngenta

Management Decisions for Uniform Emergence and Early Growth
Knowing the environmental requirements for uniform emergence, let’s look at 4 key management decisions that must be evaluated before planting:
  1. Soil Moisture
All potential benefits of early planting will be lost if you either till or no-till into wet field conditions. Working wet soil produces “clods” that reduce seed to soil contact and cause emergence delays. Cloddy seed beds can also cause planter units to bounce and dramatically affect planting depth.

Sidewall compaction in wet soil causes emergence problems and hinders future root development. Compacting the soil reduces soil pore space, which limits root access to oxygen, moisture and fertility. Soil compaction also reduces water infiltration rates and increases run-off potential. Because of these factors, corn planted in compacted soil is very susceptible to injury from damping off and other diseases, as well as drought. 
  1. Planter Condition
Worn planter parts can cause problems in achieving uniform corn stands. Worn disk openers are a major cause of poor seed-to-soil contact and can affect the target seeding depth needed to establish a uniform stand. Worn drive chains and seed meters can affect plant spacing and target populations needed to maximize yield potential.
  1. Planting Depth
Maintain a planting depth of 2”. While shallow-planted corn (planted less than 1.5”) may occasionally emerge faster, the long-term benefits of proper planting depth will outweigh the quick emergence associated with shallow planting. If you plant corn less than 2” deep, you could reduce the space available for proper nodal root development, causing these roots to develop at or near the soil surface. Nodal roots will either not develop or develop slowly when confronted with soil surface conditions. A seed planted at the proper depth in a non-compacted environment will grow a healthy seedling and root system, which will support a uniform stand and maximize the field’s yield potential.
  1. Crop Residue
Residue from a previous crop is a major cause of poor uniformity. Residue in the seed furrow can drastically reduce seed-to-soil contact and can cause planter units to bounce, dramatically affecting planting depth. Residue can also increase variability in soil moisture and soil temperature, causing irregularity in plant vigor and uniformity.

Achieving Uniform Corn Stand
Maximizing a field’s potential requires establishing a uniform stand. In order to do so, it is critical to evaluate every field and develop management practices for each independently. Remember to till and/or plant a specific field only when:
  1. Soil temperature and moisture conditions are good.
  2. Your planter is properly set and maintained.
For questions or more information on corn emergence, contact your local Golden Harvest Seed Advisor.

Photos are either the property of Syngenta or used under agreement.
Syngenta hereby disclaims liability for third-party websites.


You are viewing from

Thank you for visiting the Golden Harvest website. We understand how important it is for you to find agronomic and product information pertinent to your local area. Please enter your zip code or select your area below to ensure you are seeing the information that matters most to you.
Learn more about regions >


We’re sorry. Golden Harvest is not available in this area. Please try another zip code or contact a Golden Harvest Seed Advisor for more information.

Is this page helpful to you?

How can we improve
this page? (optional)

Can you tell us your
role in agriculture? (optional)

Thanks for the feedback.

We appreciate your participation